TRAK TC820LTYsi Turning Center w/Siemens Sinumerik One Control TC820LTYsi
TRAK TC820LTYsi Turning Center w/Siemens Sinumerik One Control TC820LTYsi
$111,488 (USD)
Location:Albert Lea, MN
orCall 712-737-8700
Description
Equipped with:
Bar puller
Collet chuck Pullback QG-65
Part catcher
Coolant-high press
Transformer
(2)Boring bar holder
(2)Driven axial holder
(2)Driven radial holder
(2)Facing tool ¾” holder
CNC user memory 4.6 GB
Handwheel run
Measuring cycle for auto mode
One dynamics turning
Specifications
| Manufacturer | TRAK TC820LTYsi Turning Center w/Siemens Sinumerik One Control |
| Model | TC820LTYsi |
| Condition | New |
| Stock Number | 10993 |
| Height of centers | 47.3" |
| Maximum turned length | 19.29" |
| Maximum swing | 15.75" |
| Swing over carriage cover | 12.59" |
| Maximum turned diameter | 8.66" |
| Tool section maximum | 0.75" |
| Rapid speeds | 787 IPM on X & Z axes, 590 IPM on Y axis |
| X axis travel | 8.11" |
| Y axis travel | 2.75" |
| Z axis travel | 19.69" |
| Spindle nose front | A2-6 |
| Chuck diameter | 7.88" |
| Drawtube thread | M74 x 2.0 x 35 mm |
| Bar capacity | 2.56" |
| Spindle bore | 3" |
| Spindle front bearing diameter | 4.33" |
| Number of bearings | 4 |
| Drive system | Belt drive |
| Spindle speed range | 10-4,000 RPM |
| Spindle motor brake | Yes |
| Quill travel | 4.72" |
| Quill diameter | 2.95" |
| Quill taper hole | MT4 |
| Motor (peak) | 38 HP |
| Motor (continuous) | 14.75 HP |
| Number of tool station | 12 live tool stations (BMT45) |
| Coolant tank capacity | 50 gallons |
| Hydraulic oil capacity | 11 gallons |
| Machine dimensions | 128" x 82" x 79" |
| Machine weight | 9,700 LBS |